NO HOT WATER? Follow These Simple Tips
NO HOT WATER? Follow These Simple Tips
Blog Article
Everyone will have his or her own conception on the subject of How to Troubleshoot and Repair an Electric Water Heater.
Several modern homes take advantage of an electric water heater for their furnace, due to its comfort and simplicity of use. Nonetheless, just like any other electric appliances, problems might arise with its usage, all of a sudden. It can be truly irritating to wake up to a chilly shower as opposed to a hot one or having your bathroom with water that isn't warm enough or perhaps too hot. Whatever the situation might be, water heater issues can be fairly stressful. Luckily, we've made a listing of feasible solutions to your hot water heater concerns. There are a variety of variables that could cause a lot of these problems, it could be an issue with the power supply, the electrical heating element, or the thermostat. Before doing anything, ensure you turn off the main power supply for security. Whatever the trouble is, getting it fixed should not pose too much of an issue if you follow these actions:
Examine Your Power Supply:
As standard as this might seem, it is very necessary. Without adequate power, your water heater will not operate. So the first thing to do when your water instantly retires is to validate that it isn't a power trouble. Inspect if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the concern, merely transform it on and off once again. Replace any broken or damaged fuse. Examine the home appliance with power after these modifications to see if it's now working.
Examine the Burner in the Water Heater:
If it's not a power problem, then attempt looking into your burner if it is still working. Test each of your burner to ensure the issue isn't with any of them. If any one of them is damaged, change that part and then inspect whether the hot water is back on.
Check Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't warm sufficient, you may need to examine the temperature level settings on your top thermostat. Make sure the circuit breaker is switched off prior to doing anything. Open the access panel and also press the red button for temperature level reset over the thermostat. This ought to aid warm the water. Turn the breaker back on as well as check if the trouble has actually been dealt with.
Call A Specialist:
If after changing all faulty components as well as resetting your temperature, the hot water heater still isn't working, you might need to speak to a professional plumber for a professional viewpoint. The problem with your heating unit could be that the hot and cold faucets have been switched over or it may be undersized for the quantity of hot water required in your home. Whatever the case might be, a professional plumber would certainly help fix the problem.
Conclusion
Hot water heater problems are not constantly major. Much of them result from minor concerns like a blown fuse or worn-out burner. Replacing the malfunctioning parts ought to suffice. Nevertheless, if you are still incapable to solve the issue, give a call to your nearest plumber to find to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We hope you liked our part on No Hot Water — Water Heater Repair. Thank you for finding the time to read through our post. Liked our blog entry? Please share it. Let another person locate it. Thanks a bunch for your time. Visit us again soon.
Book Today!
Report this page